304 Stainless Steel Carbon Steel Automatic Quartz Sand Activated Carbon Multi-Media Filter Reclaimed Water Treatment
The full-automatic mechanical filter is applicable to industrial and mining enterprises and urban water supply treatment equipment that require that the turbidity of filtered water is generally within 5mg / L and can meet the drinking water quality standards. It has a good removal effect on suspended solids in industrial sewage. The suspended solids contained in the water condense into flakes, which can not be removed by the sedimentation method. The bonded colloidal particles can pass the water through the filter layer installed in the pressure filter to make the water transparent.
Mechanical filter, also known as pressure filter, is the pre-treatment of pure water preparation and an important part of waterpurification system. Its material is made of steel lined rubber or stainless steel. Due to different filling media of the filter,its purpose and function are different. Generally, there are quartz sand filter, activated carbon filter and manganese sand filter. It can be used alone or in combination according to the actual situation.
The medium of multi-media filter is quartz sand, anthracite, etc. Its function is to filter out suspended solids, mechanical impurities, organic matters, etc., and reduce the turbidity of water. The medium of activated carbon filter is activated carbon,which is used to adsorb and remove pigments, organics, residual chlorine, colloids, etc. in water.
The medium of manganese sand filter is manganese sand, which mainly removes ferrous ions in water.The mechanical filter uses one or several filter media to make the raw liquid pass through the media under a certain pressure to remove impurities, so as to achieve the purpose of filtration. The fillers inside are generally quartz sand, anthracite, granularporous ceramics, manganese sand, etc. users can choose to use them according to the actual situation.
Mechanical filter is a traditional water treatment method that uses fillers to reduce water turbidity, intercept and remove suspended solids, organic matter, colloidal particles, microorganisms, chlorine smell and some heavy metal ions in the water, so as to purify the water supply.
Process description
The mechanical filter is the pretreatment equipment of the water treatment system, which is applicable to the influent with turbidity of 1-10ntu; Objective to remove the suspended solids, particles and colloids in the water, reduce the turbidity and SDI value of the influent, and meet the influent requirements of the follow-up equipment of the demineralizer; The equipment can
recover its sewage interception capacity through periodic cleaning. It is widely used in reclaimed water reuse, tap water purification, sewage treatment, central heating, central air conditioning system, central heating system, heat exchange system,construction, electric power, metallurgy, rubber, papermaking and other industries. The equipment is composed of body, water distribution device, water collecting device, external piping and instrument sampling device. The water inlet device is upper water inlet and baffle water distribution, and the water collecting device is perforated plate water filtering cap for water collection; The external piping of the equipment body is equipped with a valve and a pressure sampling interface, which is convenient for the user to install on site and realize the normal operation of the device.
The equipment is compact and easy to operate; The cleaning is simple, no bypass is required during cleaning, and the time is short; Large filtering area and high pollutant carrying capacity; The water temperature of the medium flowing through the equipment is not limited; Long service life, strong maintainability, easy installation and disassembly;
The backwashing of the equipment is gas-liquid mixed backwashing. The use of long handle filter head and the addition of compressed air during backwashing can improve the backwashing effect.
Real picture
Equipment installation
Before installation, check whether the civil foundation is constructed according to the design requirements.
The equipment shall be placed in place according to the design drawings, the outrigger sizing block shall be adjusted, and the levelness and verticality of the inlet and outlet flanges shall be checked.
Weld and fix the equipment and the embedded iron plate of the foundation, and verify the levelness and verticality of the inlet and outlet flanges again after fixing.
The piping of the equipment body shall be assembled according to the design drawing after being divided according to the number.The inner wall of each section of pipeline shall be cleaned with a clean cloth before assembly. After assembly, the piping axis shall be kept horizontal and vertical, and the valve orientation shall be reasonable (the handle of the manual valve shall face forward, and the starting head of the pneumatic valve shall face upward).
Check whether the body valve can be opened and closed flexibly, and rectify in time if there is a jam.
After the piping of the equipment body is completed, necessary support work shall be carried out for the valve group.
Install inlet and outlet water pressure gauges, sampling valves, etc. equipped on the equipment; If there is a flow probe seat on the water inlet and outlet pipe, it shall be blocked with a plug.
Company Profile
Jiangsu Longdai Environmental Technology Co., Ltd. is an environmental protection equipment manufacturer with 11 years of experience. It has provided a large number of sophisticated environmental protection equipment at home and abroad, established three branches in China, and cooperated with many universities to build Longdai R&D center. There are 4 middle doctors, 10 masters, and 25 senior engineers. Main business: "Petrochemical Wastewater Treatment, Urban and Rural Wastewater Treatment, Waste Gas Collection and Treatment, Industrial Wastewater Treatment, etc."
Main equipment: "Integrated treatment equipment, grille decontamination machine, sand water separator, mud scraper, air flotation device, dosing device, sludge thickener, rotary drum micro filter, conveyor, etc."
The technical team participates in technical exchange meetings every year, exchanges experience with professionals, continuously improves technical competitiveness, and provides customers with the clearest and most practical design solutions.
The processing team controls the manufacturing details of each equipment, and manufactures the most sophisticated and reliable equipment for customers.
The company has passed ISO9001-2008 international standard quality system certification.
We look forward to contacting you, please give us a chance. I hope we can trust each other for mutual benefit and win-win results.
FAQ
Q: What certificates do you have? A: CE/ISO/SGS
Q: Do you offer after-sales service?
A: Yes. Engineers available.
Q: How long is your warranty?
A: 2 years after the arrival of the goods. During this period, as long as it is not a man-made damage, we send the damaged parts free of charge.
Q: What about your delivery Time?
A: Normally within 45 days against down payment.
Q: What about the package of your export product?
A: We use anticorrosion wooden case with foam inside.
Q: What kind of payment do you accept?
A:T/T, L/C, PAYPAL, Cash, D/P, D/A, WESTERN UNIION, MONEYGRAM
Product Tags:
|
|
Carbon Steel Activated Carbon SS304 Multimedia Filter Reclaimed Water Treatment Images
|
