Stainless steel chain traction mud scraper manufacturer Chain plate sludge scraper for sedimentation tank
The chain type mud scraper is mainly used to scrape and remove the sediment at the bottom of the horizontal (rectangular) sedimentation tank, especially the sedimentation tank, oil separator, primary sedimentation tank and other rectangular tanks in the sewage treatment project. It can also skim the floating oil and scum on the liquid surface. The chain type mud scraper has simple structure, one machine is multi-purpose, convenient installation, operation and maintenance, safe and reliable operation, etc.
Structural Composition
The chain plate skimmer, sand scraper, mud scraper and slag skimmer are mainly composed of the deceleration drive device fixed on the ground, the traction chain with scraper set in the pool, the drive sprocket pair, the tensioning device and the safety protection device.
Working Principle
The decelerating drive device of the chain plate type mud scraper transmits the power to the drag chain through the chain wheel pair to drive the scraper to rotate directionally and continuously along the upper and lower guide rails of the pool. During the operation, the scraper scrapes the sand on the pool floor and the oil sludge on the pool surface to the sludge collecting tank and the slag discharge pipe to discharge them out of the pool.
Equipment Characteristics
1. The special chain is used for reliable transmission.
2. Waterproof bearing is adopted, with long service life.
3. The structure is reasonable and the operation is stable.
4 Sand scraping is complete and efficient.
5. The moving speed of the scraper is moderate, which has little disturbance to the sewage and is conducive to the sedimentation of suspended solids.
6. The scraper makes continuous rotary movement in the pool without reversing. The drive device is located on the platform on the top of the pool, so power distribution and maintenance are very simple
7. It can also be used as slag skimmer without additional mechanism.
Parameter
| Model Number / Parameters | ZBG-16 | ZBG-20 | ZBG-25 | ZBG-30 | ZBG-35 | ZBG-40 | ZBG-45 | ZBG-50 | ZBG-55 |
| Pool diameter Φ(m) | 16 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 |
| Deep pool depth H(m) | 3.5～4.5(According to the user's requirements) |
| Pool side water depth H2(m) | 3.0～4.0(According to the user's requirements) |
| Around the line speed v(m／min) | 2.0~3.0 |
| Walking wheel dimensions (mm) | Φ400x120 | Φ120x450 |
| power of motor N(KW) | 0.37 | 0.55 | 0.75 |
| installation size (mm) | Φ1 | 1100 | 1100 | 1200 | 1200 | 1500 | 1500 | 1800 | 1800 | 1800 |
| Φ2 | 2500 | 2500 | 2500 | 3500 | 4000 | 4500 | 5000 | 5500 | 6000 |
| Φ3 | 2600 | 3000 | 3800 | 4500 | 4500 | 5000 | 5000 | 6000 | 6000 |
| Φ4 | 2100 | 2300 | 3500 | 4000 | 4000 | 4000 | 4500 | 4500 | 4500 |
| H2 | 500 | 500 | 600 | 760 | 760 | 760 | 760 | 760 | 760 |
| B | According to the user's requirements |
| H3 | According to the user's requirements |
| L | According to the user's requirements |
| Around the wheel pressure P1(KN) | 9.0 | 11.5 | 15 | 19 | 22 | 25 | 28 | 30 | 32 |
| Vertical load of the central platform P2(KN) | 17 | 23 | 30 | 37 | 82 | 100 | 112 | 122 | 175 |
| Center load of center load P3(KN) | 9.5 | 13 | 17 | 22 | 28 | 28 | 30 | 32 | 40 |
Real Picture
Company Profile
Jiangsu Longdai Environmental Technology Co., Ltd. is an environmental protection equipment manufacturer with 11 years of experience. It has provided a large number of sophisticated environmental protection equipment at home and abroad, established three branches in China, and cooperated with many universities to build Longdai R&D center. There are 4 middle doctors, 10 masters, and 25 senior engineers. Main business: "Petrochemical Wastewater Treatment, Urban and Rural Wastewater Treatment, Waste Gas Collection and Treatment, Industrial Wastewater Treatment, etc."
Main equipment: "Integrated treatment equipment, grille decontamination machine, sand water separator, mud scraper, air flotation device, dosing device, sludge thickener, rotary drum micro filter, conveyor, etc."
The technical team participates in technical exchange meetings every year, exchanges experience with professionals, continuously improves technical competitiveness, and provides customers with the clearest and most practical design solutions.
The processing team controls the manufacturing details of each equipment, and manufactures the most sophisticated and reliable equipment for customers.
The company has passed ISO9001-2008 international standard quality system certification.
We look forward to contacting you, please give us a chance. I hope we can trust each other for mutual benefit and win-win results.
FAQ
Q: What certificates do you have?
A: CE/ISO/SGS
Q: Do you offer after-sales service?
A: Yes. Engineers available.
Q: How long is your warranty?
A: 2 years after the arrival of the goods. During this period, as long as it is not a man-made damage, we send the damaged parts free of charge.
Q: What about your delivery Time?
A: Normally within 45 days against down payment.
Q: What about the package of your export product?
A: We use anticorrosion wooden case with foam inside.
Q: What kind of payment do you accept? A: T/T, L/C, PAYPAL, Cash, D/P, D/A, WESTERN UNIION, MONEYGRAM
Product Tags:
|
|
SS Chain Traction Mud Scraper Chain Plate Sludge Scraper For Sedimentation Tank Images
|
